Assessing Well Performance and Planning for Future Water Needs

Articles

Assessing Well Performance: Planning for Future Water Needs

Watershed-Health-Indicator

When a well is not producing what it “should,” the first question is why? The cause may be the well itself, the pump, changing groundwater conditions in the aquifer, or broader watershed conditions such as drought and reduced recharge. Understanding the difference is critical to determining the right response.

The best time to identify a well-performance problem is before you need the capacity.

Evaluating wells in autumn provides time to address concerns and prepare for next summer’s peak demand. The good news is that most water suppliers are already collecting much of the information needed to answer these questions. SCADA records of pumping rates, water levels and run times, combined with maintenance history and regional groundwater data, can provide valuable insight into how a well is performing and, importantly, how that performance is changing over time.

One useful measure is specific capacity, or pumping rate divided by drawdown. A well may still produce its required flow while requiring progressively more drawdown to do so. Tracking specific capacity under comparable operating conditions can identify declining well performance before a significant loss of production occurs.

The next challenge is determining whether that decline reflects the well or the aquifer. Groundwater levels naturally fluctuate in response to precipitation, drought, recharge and pumping. Comparing well performance with regional groundwater conditions can help separate these influences. If well efficiency is declining independently of aquifer conditions, inspection, cleaning or rehabilitation may be warranted. Periodic well testing and redevelopment reports remain important, but they provide snapshots of performance. SCADA offers something different: the opportunity to understand what happens between those snapshots and identify trends as they develop.

Weston & Sampson’s wsOne | water Well Health module was developed to turn these existing data into useful information.

The platform filters SCADA data to evaluate representative operating conditions, tracks specific-capacity trends, incorporates redevelopment history, and evaluates groundwater conditions to help utilities understand whether well performance is changing and how quickly.

That information can help utilities move from reacting to a poorly performing well to proactively planning inspections, rehabilitation and, when necessary, replacement or additional water supply. Starting that evaluation now provides valuable time to complete needed work before summer demand places the greatest stress on the system. The data are often already there. The value comes from understanding what the data are telling you, while there is still time to act.

Contact Weston & Sampson to discuss how your existing operational data can support well maintenance and help prepare your system for next summer’s peak-demand season.